|
|
•100PC unit is designed for all Honda PC models. It has a matching 6-pin connector to allow the main feed of the brakes circuit to be interrupted - simple in line plug-in.
• 100PC unit is a heavy-duty unit which will flash up to (4) brake light bulbs when the brakes are applied.
• 100PC unit mounts under the seat on the trunk fire wall
• When you apply the brakes the brake light will modulate fast at first then slow down to a solid on over a four second period.
• Our modulator will not affect the life of your bulb because it utilizes a soft-switching technology. Soft-switching is a technique which throttles the current flow through the bulb filament, so that there's no "thermal shock" - as opposed to a sudden inrush of current, which can damage the bulb filament or shorten it's life considerably. This is far superior than maintaining a small voltage!
• The internal circuitry is being controlled by a microprocessor. The microprocessor allows for customizable features. The microprocessor can be programmed to adjust intensity of the taillight. Simply hold the brakes and turn the ignition on three times quickly, this procedure will toggle between the two intensities "High" and "Low". |
|
-
|
