Cage Clamp® Connectors Details
Open the clamping point using one of the small orange colored levers so that the lever engages and keeps the clamping point in its opened position.
The stripped wire can then be inserted into the clamping unit. When this is accomplished, the lever should be returned to its closed position flush with the terminal block housing. This reliably prevents accidental unclamping of a connected wire.
|
Description: Terminal Block Wire Size (AWG):28-12; Body Material: Polyamide; Color: Gray; Connector Retention Style: Spring Clip; Contact Finish: Tin Over Copper; Contact Material: Stainless Steel; Current Rating:20A; Gender: Female RoHS Compliant: Yes
|
Step 1
|
Strip wire 9 - 10 mm. Use the stripped wire gauge on the back of the connector to verify correct strip length
|
|
-
Step 2
Connection: Push up lever and insert conductor
|
|
-
|
Step 3
. . . then push down lever to its closed position
|
|
Cage Clamp® Connectors are included in all LED Accent Light Kits but can also be purchased individually below. You can insert up to 5 (24 gauge) wires per slot, therefore one 5 position connector will connect up to 24 LED Accent Lights together. You will need one connector for the positive wires and one for the negative wires.
- Item #: CG01
5 Position Cage Clamp® Connector
- Price $0.90 each
|
- Item #: CG03
3 Position Cage Clamp® Connector
- Price $0.75 each
|
- Item #: CG02
2 Position Cage Clamp® Connector
- Price $0.50 each
|
Cage Camp® is a registered trademark of Wago®
3M Scotchlock 314 Electrical Connectors
3M™ Scotchlok™ 314 Electrical IDC, Pigtail, Moisture Resistant
22 to 14 (0.5-1.5) AWG, Blue. The 3M™ Scotchlok™ 314 Self-Stripping, Moisture
Resistant Electrical Pigtail Connector provides a moisture-resistant seal.
Maximum insulation O.D. diameter of 0.155 inches (3,9 mm) and a operating
temperature of 221(deg)F (105(deg)C .
- Item #314
2 Position Cage Clamp® Connector
- Price $0.75 each
|
