Custom LED Yamaha R1 2009 Blaster-X
Integrated LED Tail Light Complete Unit
This product features Custom LED's proprietary and patented Blaster-X, Brake
Alert and Strobe Mode! With this product, your turn signals are built right into
the tail light! It's the best fender eliminator money can buy.
Custom LED is a pioneer in the art and science of LED tail light integration.
Our products are designed, manufactured and assembled at Custom LED right here
in the USA. You
will notice a significant difference in quality, performance, and features with
Custom LED.
This product installs into your bike with a Plug N Play Complete Tail Light
assembly and harness replacing the factory tail light and lens. Instruction
included with purchase.
Features:
Our Microprocessor based Blaster-X Technology with Brake
Alert and Strobe Mode built in!
New Programming Interface allows users to easily customize
features!
New Sure-Blink Technology
Recommended accessory: ELFR-1 Flasher Relay
Made in the USA!
2-year Warranty!
This is an ultra-high intensity, high-performance Integrated
LED Tail Light for the 2009 Yamaha YZF-R1. This product is designed to directly
replace the complete tail light of the 2009 Yamaha YZF-R1 OEM tail light.
The Custom LED 2009 Yamaha YZF-R1 Integrated LED Tail Light now features the
latest version of our proprietary and patented Blaster-X technology with Brake
Alert and Strobe Mode! With this product, your turn signals are built right into
the tail light! It's the best fender eliminator money can buy.
Brake Alert automatically provides three
quick pulses of light the instant the brakes are applied. This alerts motorists
the instant you apply the brakes - possibly saving seconds of reaction time for
non alert motorists!
Strobe Mode is a feature that puts the
taillight into a devastating strobe cycle that is sure to get anyone's
attention. This mode produces insanely bright pulses of light at ultra high
frequencies, in alternating patterns across the tail light. Strobe mode is
engaged by grounding a control wire, and can be engaged at any time.
Blaster-X is our
proprietary pulse-width-modulation (PWM) technology that squeezes the maximum
possible illumination power out of LEDs. The result is a significantly less
expensive, yet even more outstanding and effective product than it's
predecessors - and widens our advantage over our competitors.
NEW! This product also marks the
introduction of our NEW Programming Interface which allows users to easily
customize features of the tail light!
The customizable features menu
allows users to:
Enable or Disable the Startup Sequence.
Set the number of pulses in the Brake Alert feature (can set
to zero to disable Brake Alert).
Adjust the running light brightness within a preset range
Adjust the brake light brightness within a preset range
Engage Demo Mode, where the tail light cycles through all
functions automatically and repeatedly!
Reset factory defaults
This programming interface is accessed very simply through the
Strobe Mode control wire! The interface is designed to receive input simply by
providing ground pulses to the strobe mode control wire. No special equipment is
necessary to access and utilize the programming interface! Detailed programming
instructions will ship with every unit.
NEW! And last but not least, our Sure-Blink
Technology. Our Integrated Tail Lights are designed to follow the turn signal
commands of the motorcycles flasher relay. This insures it is compatible with
all after market and OEM flasher relays - especially programmable relays such as
our ELFR-P. However, in the event that the tail light receives a command to
blink that does not break (blink) within a preset time period, the tail light
will automatically blink that side. This feature is most useful in preventing
common no-blink problems that are associated with retrofitting motorcycles to
LEDs. Also, in keeping with this effort, we have also built in our ever popular
Stage I Load Equalizers into this tail light!
This high performance Integrated tail light utilizes 32
Ultra Bright Red LEDs and 32 Ultra Bright
Yellow LEDs - compared to only 21 red LEDs on the stock circuit
board! These LEDs effectively handle the functions of: Running Light (red),
Brake Light (red) and Turn Signals (amber) - all within the tail light housing!
Just as on the other Custom LED Integrated LED Tail Light models, the system is
designed so that the red LEDs turn off (on the turn side) when the yellow LEDs
come on, so that the turn indication is a pure and distinguishable yellow light.
The unit automatically flashes between the red and yellow on the side you're
turning! The Yellow LEDs are slightly offset as well, creating a dramatic
attention grabbing effect.
The engineering is solid and dependable, the looks are unbeatable, and the
brightness is incredible!
Don't waste your time with half
hearted solutions, do it the right way from the start, with Custom LED
Custom LED Yamaha R1 2009 Blaster-X Integrated LED Tail
Light Complete Unit
|
