Kawasaki Cruiser LED
Turn Signals
Fits all Kawasaki Models with 2 screw Lens as shown
(Including Kawasaki Vulcan, Nomad, Drifter, Eliminator)
If your Kawasaki Turn signal lens uses one screw please
use these
By Street Magic Cycle Product®
The Best LEDs
On the Market Today Backed By the Best Warranty.
Lifetime Manufacture Warranty Against LED Failure!!!
Featuring Genesis™ Technology - The Next Generation of LEDs - The Absolute
Best LED Turn Signal Inserts on the Market Today or Your Money Back Guaranteed! Your 100% Satisfaction with All Genesis LED Products is Guaranteed by Custom Dynamics. Genesis - Its a Whole New World!™
Plug and Play - No Cutting, No Splicing
48 Wide Angle Super Bright Next Generation Genesis LEDs per Cluster
Uses Existing Lens and Bucket
New Easy Install Bases
Fits: All Kawasaki
Cruisers with stock turn signals lens that are the type with two screws.
When converting turn signals to LEDs a load
equalizer or non load dependent flasher
is needed to slow down the flash rate. If you have a 2 or 3 pin flasher you can
replace the flasher with our
EDFR flasher, otherwise one
7.5 Ohm Load equalizer is
need for each pair of turn signals converted. If your bike has a single turn
signal indicator (the bulb that tells you the turn signal are on) AND you are
converting the fronts turn signals to LEDS, you need to purchase our
metric cruiser
diode kit.
Need Help Identifying your bulb type, click here
Clear & Smoked Kawasaki Turn Signal Lenses
- Kawasaki Turn Signal LED Inserts
- Amber 1156/single intensity
Item: GEN180-A-1156-THK
Price:
$51.95 (pair)
|
- Kawasaki Turn Signal LED Inserts
- Amber
1157/dual
intensity
Item: GEN180-A-1157-THK- Price:
$51.95 (pair)
|
|
Kawasaki
Turn Signal LED Inserts
Red
1156/single intensity
Item: GEN180-R-1156-THK
Price:
$51.95 (pair)
|
- Kawasaki Turn Signal LED Inserts
- Amber
BAZ-3/dual intensity
Item: GEN180-A-BAZ-THK- Price:
$51.95 (pair)
|
- Kawasaki Turn Signal LED Inserts
- Red
7507/single intensity
Item: GEN180-R-7507-THK
Price:
$51.95 (pair)
|
- Kawasaki Turn Signal LED Inserts
- Amber
7507/single intensity
Item: GEN180-A-7507-THK
Price:
$51.95 (pair)
|
Complete Kawasaki LED Turn Signal Conversion Kits
- Kit Includes: 4 Genesis Plug and Play LED Turn Signals
- 2 Street Magic Load Equalizers or 1 EDFR Flasher or 1 Metric Signal
Stabilizer
- 1 Metric Cruiser Diode Kit
-
-
- Kawasaki Turn Signal Conversion Kit
|
by Street Magic Cycle Products™
-
Your stock rear turn signals are just that - turn signals. You can add a controller to convert them to run/brake or turn OR for a few more dollars you can upgrade them to a super bright low current
- draw all LED solution that will perform run/brake AND turn functions simultaneously!
These clusters can be wired as: Red low intensity Running light, Red High Intensity Brake Light, and Amber High Intensity Turn Signals, this allows your rear turn signals to be converted from simple turn signals to Dynamic running, brake, and turns signals, all in one unit!!! Installation is very simple, just plug the base to the stock turn signal housing receptacle, run the orange running light wire and the red brake light wires through the stock turn signal steams back to the taillight, connect the orange wire to the stock running light and the red wire to the stock brake light wire with the supplied posi-tap connectors.
Dynamic Clusters™ can be used with Amber, Clear or Smoked Lenses, check out our lenses here. The Red LEDs are so powerful they will shine Red though most stock Amber lenses, however a more dynamic effect can be achieved with smoked or clear lenses.
Dynamic Clusters™ have a Life Time Warranty.
|
Dynamic Cluster LED Turn Signals
for Kawasaki Cruisers with 1156 Bases
Item: GEN180-AR-1156-THK
Price: $81.00 pair
|
- Dynamic Cluster LED Turn Signals for
Kawasaki
Cruisers with 7507 Bases
- Item: GEN180-AR-7507-THK
- Price: $81.00 pair
|
