|
LED Architectural / Decorative Lighting Not sure How to Install Led Lighting?
LED Architectural & Decorative Lights
3 LED Stingerz™ is 1.2" long
9 LED Stingerz™ is 3.5" long
12 LED Stingerz™ is 4.7" long
24 LED Stingerz™ is 9.4" long
30 LED Stingerz™ is 11.8" long
99 LED Stingerz™ is 39.4" long
Street Magic™ Black Magic™ Wireless Remote with Built in Strobe, Breathe & Fader Includes 2 Keychain Remote Control Units, Built in Fuse, and Quick Connectors This hot new unit has it all, a built in strobe, fader and a new breathe function, all with just a push of a button! This unit will allow you to control your LEDs from up to 100 feet away! Example of Functions: 1) Breathe - The remote control slowly decreases the LEDs from full brightness down to dim then slowly increases the LED intensity back to full brightness and then repeats. With this function the LEDs will appear to be "breathing" 2) Strobe - By far the wildest strobe patterns on the market. This remote control has 3 different strobe patterns that will definitely make your vehicle stand out. 3) Fade - Select one of four different intensity modes: 25%, 50%, 75%, 100% of full brightness. 4) On/Off - simply turn your LEDs on and off up to 100ft away. Unit hooks up with 4 simple wires and comes with step by step instructions including everything needed to install your Street Magic™ Black Magic™ unit to your vehicle.
Transformer 1210A - 10 Watt
100 ~ 240vac switchable, Regulated, UL and CE Listed. Reduces 120/240vac to 12v, then converts it into 12v DC. These are plug-in types with 6 foot cables and a barrel connector. Measures 2 3/4" x 1 5/8" x 1 1/8" thick. These transformers come with a Barrel Connector. Cut off the Barrel Connector and split the wire into two strands. Black with white bar or words is negative and connects to black lead on your fixture. The solid black wire is positive and connects to the red lead 100 ~ 240vac to 12VDC, 1000 mA - 1.0 amp
current load capacity
Transformer #1.5 - 1.5 Amp-18 Watt
90~ 250vac, 50-60Hz input, Regulated, UL, C-UL and CE Listed. RoHS compliant. Reduces 90/250 vac to 12v, then converts it into 12v DC. These are plug-in types with 4.5 foot cable with wire leads at one end; 4.5 foot cable with two prong polarized plug at the other end. White is positive, black is negative. Simply connect the positive and negative leads to your fixture, and plug it in to an AC outlet. Operating temperature -25°C to 40° C
(-13F to 104F) 90-240vac to 12VDC, 1500 mA - 1 1200mA max current load
Transformer #2.5 - 2.5 Amp-30 Watt 
90 ~ 130vac, 50-60Hz input, Regulated, UL, C-UL and CE Listed. RoHS compliant. Reduces 90/130 vac to 12v, then converts it into 12v DC. These are plug-in types with 1.5 meter (4.92 ft) cable with wire leads at one end; 1.5 meter (4.92 ft) cable with two prong polarized plug at the other end. White is positive, black is negative. Simply connect the positive and negative leads to your fixture, and plug it in to an AC outlet. Operating temperature -25°C to 40° C (-13F to 104F)
90-130vac to 12VDC, 2500 mA -
Transformer #5-60 Watt
Input Voltage Range : 100 ~ 264Vac DC Output - 5.0amp ... powers current load up to 4000mA - 12VDC Constant Voltage Output Efficiency : 75Can Be Hard wired. See Transformer InstallationEfficiency: 75% at 100volt input: OCP , OVP ,SCP – Auto UL(cUL)1310, CE Certified
Transformer 1060-12-290 - 60
Watt
I nput Voltage Range : 100 ~ 240VacDC Output - 5.0amp - powers current load up to 4800mA - 12VDC Constant Voltage Output Can Be Hard wired. See Transformer Installation. Suitable for Dry or Damp Locations, IP66 , NEMA4 Convection Cooled, Plastic Housing Efficiency : 84 % Typical at full Protection : OCP , OVP ,SCP – Auto UL(cUL)1310, UL(cUL)48 Class 2 Approved, FCC,CE Certified Compliance – 47CFR Part 2 and CISPR B , CE Recovery Measures 11 1/2" x 2 1/2" x 1 1/2" thick
Transformer 24Vdc - 2462A
Input Voltage Range : 100 ~ 264Vac Switchable DC Output - 6.2amp ... powers current load up to 5800mA Max, 24Vdc Constant Voltage Output Can Be Hard wired. See Transformer Installation. Efficiency : 90 % at 100/240volt input: OCP , OVP ,SCP – Auto UL(cUL)1310, CE Certified Includes wall to transformer cord and plug
These transformers come with a Barrel Connector. Cut off the connector and split the wire into two strands. Solid black is positive and connects to red lead on your fixture. Black wire with print or white bar is negative and connects to the black lead on your fixture.
ALN-30L-SW-12vdc 2 amp Linear Power Supply
Zane® Control Products 12vdc Linear Power Supply (PDF file) is a regulated power supply for small electronics. Control voltage from any 12vdc power source to a preset level. Applications include control of voltage from solar panels and batteries to 12vdc to safely run any LED bulb or fixture; i.e.; travel trailers, RVs, boats, planes , vehicles. 12vdc, 2.0 amp capacity with plate and switch; for outlet type box installation.
ADM-34L-12v - 4.0 amp Dimmer Zane® Control Products ADM-34L-12v - 4.0 amp Dimmer (pdf file) with PWM/pulse width modulation, features full range brightness and on/off function for up to 3.8 amp/3800mA current load. Compact size and generates no RF interference. Rated for 4.0 amps at 12vdc. Includes wall plate, screws, knob and lock nut. Made for single gang box.
AMD-48R-12V 12vdc Mini Dimmer
Zane® Control Products AMD-48R-12V 12vdc Mini Dimmer (pdf file) with PWM/pulse width modulation, for handheld devices and OEM applications. This a terrific size for space limited installations such as lanterns and control boxes. Rated for 8.0 amps to 12.0 amps at 12vdc. Includes knob and lock nut.
ADM-48L-24v - 8.0 amp Dimmer
Zane® Control Products ADM-48L-24v - 8.0 amp Dimmer (pdf file) with PWM/pulse width modulation, and features full range brightness and on/off function. Compact size and generates no RF interference. Rated for 8.0 amps at 24vdc. Includes wall plate, screws, knob and lock nut. Made for single gang box.
Remote Controlled Dimmer
Remote Controlled Dimmer with full range brightness and on/off function. Surface mount model only. Use with any 12vdc or 24vdc LED product we show on this website. Compact size and generates no RF interference. Rated for 5.0 amps at 12 to 24 volts DC input 12vdc in, 12vdc output 24vdc in, 24vdc output Manually operated, or controlled with included remote. Measures 4.5 inches x
2.125 inches x 1.25 inches high.
LED Interior / Architectural Lighting - Do It Yourself Video
|
|
