|
|
|
|||||||||||||||||||||||||||
 |
 |
||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
-
-
- Thanksgiving Special: Free UPS Ground Shipping On Orders Over $50 (U.S. Only)
| ||||||||||||||||||||||||||||||||||||||
|
Magic Blinkers by Custom LED
Convert Any Single Intensity Bulb to Dual Intensity Features: Running Light is on 100% Turn Signals Blink from Full Off to Full On The Custom LED "Magic Blinker" is designed to allow single filament light bulbs (or single intensity LED assemblies) to function as both running lights AND blinkers - at full brightness! Simply connect your single filament bulb or LED as described in our instructions, and your indicator bulbs/LEDs will now stay on constantly as running lights, and blink when you engage the blinkers! Note: the indicator will turn off for the duration of the blinker pulse - this is how the blinking is achieved. The Custom LED Magic Blinkers are designed to be as small as possible while being as versatile and robust as possible. The finished dimensions of the unit will measure approximately 0.7" x 1.25" and can carry up to 5A (~65W) of current!. This ensures our product will work for any application. To further ease installation and ensure dependability, the Custom LED Magic Blinkers are highly water resistant - as any motorcycle product should be. The Magic Blinkers were will work with the Gregg's Customs flushmount LEDs, Flex LED Array, LED or Halogen Silver Bullets or any and all situations where a single filament lamp, or single brightness LED or LED cluster is desired to function as both a running light and a blinker light. The Magic Blinkers come with 7" leads, all required electrical connectors and detailed installation instructions! Also provided is a special power conditioner that will ensure the longevity and brightness of the LEDs when used as both running light AND blinkers One Magic Blinker is required per turn signal, if you are converting your front turn signals, you would need to order 1 Magic Blinkers as they are sold in pairs. Note: If your motorcycle had running lights that turn off when your turn signals are activated, you will need to connect to an alternate power source such as the taillight or headlight. Most Honda's have this function on the front turn signals. Installation Instructions (Note: Resistor is only need when used with Greggs Customs Flushmounts)
|
|
; void('');)
